Differences

This shows you the differences between two versions of the page.

--- workflow:quartz [2020/03/03 10:56]
admin created
+++ workflow:quartz [2020/06/15 10:24] (current)
cduncan
@@ Line 1: / Line 1: @@
 ~~NOTRANS~~
-~~Title: Quartz Scheduler integration~~
+~~Title: Quartz Scheduler Integration~~
+Version: 1.0 / 2020-03-04
+====== Introduction ======
+This document describes the integration of Quartz Job Scheduler with VisionX workflow module. Basically, it  explains how a workflow can be started by Quartz Job Scheduler.
+====== Requirements ======
+We need following tools and libraries:
+  * Eclipse IDE (EE variant)
+  * Tomcat application server, 8 or newer
+  * Quartz release, 2.3.0 or newer
+  * Javax transaction API (javax.transaction-api-1.3.jar), 1.3 or newer
+  * Java Mail API (javax.mail-1.5.4.jar), 1.4 or newer
+  * JDBC drivers for datasources used in config.xml
+  * wfengineserver.jar
+  * jvx.jar
+  * appsclient.jar
+====== Example ======
+First, create a new dynamic web project in Eclipse IDE. After that, add all Quartz libraries from the **quartz_install/lib** folder to your web library folder **WebContent/WEB-INF/lib**. You will also need to add Javax transaction API, Java Mail API, JDBC drivers, wfengineserver.jar, jvx.jar and appsclient.jar to your web library folder.
+After your dependencies are configured, create a new Java package in the src folder of the project. Set **com.sibvisions.quartz** as name. Create a new Java class in this package. The name of the class should be **WorkflowJob**.
+Use following source code:
+<code java>
+public class WorkflowJob implements Job
+{
+    public void execute(JobExecutionContext context) throws JobExecutionException
+    {
+        JobDataMap jobDataMap = context.getJobDetail().getJobDataMap();
+        try
+        {
+            // start workflow
+            WorkflowEngine.getWorkflowEngine("QuartzIntegration").startWorkflow("quartz",
+                                                                                BigDecimal.valueOf(jobDataMap.getInt("workflowId")),
+                                                                                new Object[] { jobDataMap.getString("mailTo") });
+        }
+        catch (Exception ex)
+        {
+            LoggerFactory.getLogger(WorkflowJob.class).error(ex);
+        }
+    }
+}
+</code>
+The WorkflowJob is a simple Java class, that instantiates WorkflowEngine for a specific application (**QuartzIntegration**) and starts workflow for a specific user (**quartz**) with configured workflow ID and email parameter. The configuration of parameters will be explained later.
+To complete our example, we need to start the Quartz Scheduler. To do this, add following to your Deploymentdescriptor in **WebContent/WEB-INF/web.xml**:
+<code xml>
+<listener>
+    <listener-class>org.quartz.ee.servlet.QuartzInitializerListener</listener-class>
+  </listener>
+</code>
+====== Configuration ======
+===== Job Configuration =====
+Now it's time to configure the Quartz job. To do this, create the folder //classes// in **WebContent/WEB-INF** if missing. In **WebContent/WEB-INF/classes** create //quartz.properties// file with following content:
+<code>
+org.quartz.threadPool.threadCount=5
+org.quartz.plugin.jobInitializer.class=org.quartz.plugins.xml.XMLSchedulingDataProcessorPlugin
+org.quartz.plugin.jobInitializer.fileNames=quartz_data.xml
+org.quartz.plugin.jobInitializer.wrapInUserTransaction=false
+</code>
+In **WebContent/WEB-INF/classes** create //quartz_data.xml// with following content:
+<code xml>
+<?xml version="1.0" encoding="UTF-8"?>
+<job-scheduling-data
+    xmlns="http://www.quartz-scheduler.org/xml/JobSchedulingData"
+    xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance"
+    xsi:schemaLocation="http://www.quartz-scheduler.org/xml/JobSchedulingData http://www.quartz-scheduler.org/xml/job_scheduling_data_2_0.xsd"
+    version="1.8">
+    <schedule>
+        <job>
+            <name>WorkflowJob</name>
+            <job-class>com.sibvisions.quartz.WorkflowJob</job-class>
+            <job-data-map>
+               <entry>
+                   <key>mailTo</key>
+                   <value>jozef.dorko@sibvisions.com</value>
+               </entry>
+               <entry>
+                   <key>workflowId</key>
+                   <value>133</value>
+               </entry>
+           </job-data-map>
+        </job>
+        <trigger>
+            <cron>
+                <name>WorkflowJob</name>
+                <job-name>WorkflowJob</job-name>
+                <cron-expression>0/10 * * * * ?</cron-expression>
+            </cron>
+        </trigger>
+    </schedule>
+</job-scheduling-data>
+</code>
+As you can see, we pass two parameters (//mailTo//, //workflowId//) to the job class. Quartz will use configured trigger and starts our job every ten seconds.
+Now, the job configuration is done, and Quartz will start our job. The last step is datasource configuration for your workflow engine.
+===== Datasource Configuration =====
+The datasource is needed to run a workflow. It will be configured via //config.xml//. To get everything in place, create the folder structure:
+<code>
+WebContent
+  |- WEB-INF
+      |- rad
+          |- apps
+              |- QuartzIntegration
+</code>
+This is a standard [[:jvx:common:setup:zones|JVx application structure]]. It is very important that the folder //QuartzIntegration// exists because this is the application name used in our //WorkflowJob// class:
+<code java>
+WorkflowEngine.getWorkflowEngine("QuartzIntegration")
+</code>
+Put the config.xml in folder **WebContent/WEB-INF/rad/apps/QuartzIntegration** The file contains the application configuration, e.g:
+<code xml>
+<?xml version="1.0" encoding="UTF-8"?>
+<application>
+  <securitymanager>
+    <class>com.sibvisions.rad.server.security.DBSecurityManager</class>
+    <accesscontroller>com.sibvisions.apps.server.object.DBWorkScreenAccess</accesscontroller>
+    <passwordalgorithm>SHA</passwordalgorithm>
+    <database datasource="oracle_project"/>
+  </securitymanager>
+  <datasource>
+    <db name="oracle">
+      <url>jdbc:oracle:thin:@localhost:1521:xe</url>
+      <username>appl</username>
+      <password>appl</password>
+    </db>
+    <db name="oracle_project">
+      <url>jdbc:oracle:thin:@192.168.1.35:1521:xe</url>
+      <username>job</username>
+      <password>job</password>
+    </db>
+  </datasource>
+  <mail>
+    <smtp>
+      <host>mail.server.com</host>
+      <port>587</port>
+      <username></username>
+      <password></password>
+      <tlsenabled>true</tlsenabled>
+      <defaultsender>Quartz Job &lt;noreply@server.com&gt;</defaultsender>
+    </smtp>
+  </mail>
+</application>
+</code>
+===== Logging =====
+If you want to see some details about job execution, you should configure logging. Simply create a file with the name **log4j.xml** in the //src// folder of your Eclipse project. Put following content into it:
+<code xml>
+<?xml version="1.0" encoding="UTF-8"?>
+<!DOCTYPE log4j:configuration SYSTEM "log4j.dtd">
+<log4j:configuration xmlns:log4j="http://jakarta.apache.org/log4j/">
+  <appender name="default" class="org.apache.log4j.ConsoleAppender">
+    <param name="target" value="System.out"/>
+    <layout class="org.apache.log4j.PatternLayout">
+      <param name="ConversionPattern" value="[%p] %d{dd MMM hh:mm:ss.SSS aa} %t [%c]%n%m%n%n"/>
+    </layout>
+  </appender>
+ <logger name="org.quartz">
+   <level value="info" />
+ </logger>
+  <root>
+    <level value="info" />
+    <appender-ref ref="default" />
+  </root>
+</log4j:configuration>
+</code>
+Now you're ready.
+====== Testing ======
+You have two options to test the Quartz job. First, use Eclipse to export the project as **war** file. This file can be deployed manually to any Java application server.
+The second option is to run an embedded application server directly in Eclipse. To do this, configure an application server and add your project to this server. This makes it possible to debug your code and test if everything works as expected.